LED2001PUR
| Parameters | |
|---|---|
| Applications | Lighting, Signage |
| Frequency | 850kHz |
| Base Part Number | LED2001 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 4A |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation | 2W |
| Output Current | 4A |
| Max Supply Current | 2.5mA |
| Quiescent Current | 2.5mA |
| Max Output Voltage | -1V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3V |
| Max Input Voltage | 18V |
| Output Current per Channel | 4A |
| Min Output Voltage | 18V |
| Current - Output / Channel | 4A |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 850kHz |
| Voltage - Supply (Max) | 18V |
| Voltage - Supply (Min) | 3V |
| Height | 950μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VQFN Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-VFQFPN (4x4) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
LED2001PUR Overview
8-VQFN Exposed Pad package saves space on the board. LED drivers design with 1 outputs.The mounting method adopted is Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.If the led driver ic is set to -40°C~150°C TJ, it will work normally.There are many benefits for Lighting, Signage.The system operates at a frequency of 850kHz.There are 8 pins used to form the base of its configuration.If the voltage supply is below 3V, undetermined failures may occur.It is estimated that there are 3 segments.As you can see, it is mounted by Surface Mount.LED2001 is the base part number for the LED driver.In this case, 18V is acceptable.This device is optimized to deliver a maximum voltage level of 18V.The input voltage must be minimally 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.There is 18V maximum value for supply current.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 2.5mA.An operating temperature above 150°C should ensure stable operation.There is no current available to supply to the load.It is essential to maintain a temperature greater than -40°C in order to achieve stable operation.It is capable of fulfilling its full functionality when the switching frequency remains at 850kHz.Even when operating at a maximal output current of 4A, it is capable of delivering all the benefits of a LED driver.2.5mA current is consumed in the case of no external factors.Voltages above -1V should not be allowed.It maintains a minimum voltage of 18V.A Adjustable output type is equipped with this device.
LED2001PUR Features
Available in the 8-VQFN Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 850kHz
Switching frequency of 850kHz
LED2001PUR Applications
There are a lot of STMicroelectronics LED2001PUR LED Driver ICs applications.
- White LED Backlight for portable equipment
- Other Electronic Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- High-end retail lighting
- Museum lighting
- OLED power supply for portable equipment
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- Medical surgery lighting
