LED6001
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive |
| Frequency | 100kHz~1MHz |
| Base Part Number | LED6001 |
| Output Voltage | 60V |
| Max Supply Voltage | 36V |
| Output Current | 75mA |
| Max Supply Current | 7mA |
| Max Output Voltage | 60V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Max Input Voltage (DC) | 36V |
| Min Input Voltage (DC) | 5.5V |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LED6001 Overview
On the board, there is also a 16-TSSOP (0.173, 4.40mm Width) package that saves space.This mounting method is Surface Mount.In this case, it emerges as a DC DC Controller with a high efficiency.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Automotive has many advantages.The frequency of 100kHz~1MHz is used as the basis for its operation.In this LED driver, the base is configured as 16.It consists of 1 segments.As you can see, it is mounted by Surface Mount.Part number LED6001 represents this LED driver.A maximum supply voltage of 36V is acceptable.The minimum input voltage for this device is 5.5V.In the presence of a maximum supply current, the value of 36V will be reached.When the maximum supply current is less than 7mA, the device is able to provide a high level of efficiency.Loads can only be powered by 75mA current.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.It has a voltage of 60V.Ideally, the output voltage should not exceed 60V.
LED6001 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Switching frequency of 1MHz
Output voltage of 60V
LED6001 Applications
There are a lot of STMicroelectronics LED6001 LED Driver ICs applications.
- Stage Lighting and Signage
- Portable lighting
- General lighting
- Stage and Studio lighting
- Panel lighting
- Linear fluorescent
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Industrial LED Lighting: Image Recognition Devices
- OLED power supply for portable equipment
