LED7707
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.3W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 250kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LED7707 |
| Pin Count | 2 |
| Number of Outputs | 6 |
| Power Supplies | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 2.3W |
| Max Supply Current | 1mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 85mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 85mA |
| Dimming | PWM |
| Number of Segments | 6 |
| Switching Frequency | 660kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LED7707 Overview
The 24-VFQFN Exposed Pad package conserves board space. LED drivers design with 6 outputs.For mounting, it uses the Surface Mount method.With high efficiency and reliable performance, it emerges as a DC DC Regulator.-40°C~150°C TJ is the operating temperature for the led light driver.The benefits of Backlight are considerable.Using the frequency of 250kHz~1MHz, it operates.In this case, the terminations are set to 24.It has a base of 24 pins.6 segments are present.The mount is on its way to Surface Mount.The base part number for this LED driver is LED7707.As a maximum value, 36V is acceptable.There are 2 pins on this device.Additionally, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 4.5V.A minimum supply voltage of 4.5V is required to meet the highest efficiency standards.In the case of supply current, there is a maximum value of 36V.Its high efficiency is based on the fact that the maximal supply current should not exceed 1mA.The electronic component can fully perform its functions if the switching frequency is maintained at 660kHz.
LED7707 Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 250kHz~1MHz
Supply voltage of 12V
Switching frequency of 660kHz
LED7707 Applications
There are a lot of STMicroelectronics LED7707 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Down lighting
- Replacement lamps
- Down lights
- Amusement Machines
- A- lamps
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Dimmable LED for vehicle interiors
