LED7707TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.3W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 250kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LED7707 |
| Pin Count | 2 |
| Number of Outputs | 6 |
| Power Supplies | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 2.3W |
| Output Current | 450mA |
| Max Supply Current | 1mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 85mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 85mA |
| Dimming | PWM |
| Number of Segments | 6 |
| Switching Frequency | 660kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LED7707TR Overview
Using its 24-VFQFN Exposed Pad package, it is possible to save board space. It has 6 outputs for LED drivers.For mounting, it uses the Surface Mount method.This emerges as a DC DC Regulator with high efficiency and reliability.The led light driver is capable of operating at the operating temperature of -40°C~150°C TJ.A number of benefits are available to Backlight.The system operates at a frequency of 250kHz~1MHz.The system operates with a termination of 0.In this LED driver, the base is configured as 24.There are 6 segments in it.It has been mounted on Surface Mount.Under the base part number LED7707, you will find this LED driver.36V is a maximum acceptable voltage for the supply.A device with 2 pins is available.In addition, a Display Drivers is assigned based on the characteristics of the object.This device operates with a minimum input voltage of 4.5V volts.To meet highest efficiency standards, it works on a supply voltage of 4.5V.There is 36V maximum value for supply current.When the maximum supply current is below 1mA, the device can deliver high efficiency.There is no current available to supply to the load.This electronic component can fully perform when the switching frequency is 660kHz.
LED7707TR Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 250kHz~1MHz
Supply voltage of 12V
Switching frequency of 660kHz
LED7707TR Applications
There are a lot of STMicroelectronics LED7707TR LED Driver ICs applications.
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
- LED Lightings for Inspection Devices
- LED headlights
- Industrial LED Lighting: Image Recognition Devices
