LF353MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LF353 |
| Operating Supply Voltage | 36V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Max Supply Voltage | 18V |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 6.5mA |
| Power Dissipation | 500mW |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Max Dual Supply Voltage | 18V |
| Low-Bias | YES |
| Max Frequency | 1kHz |
| Input Offset Current-Max (IIO) | 0.004μA |
| Height | 1.55mm |
| Length | 4.92mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LF353MX Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the J-FET type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.6mA and 10 . It is recommended to keep the voltage gain at 100dB at all times. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of instrumentation amplifier is rated 36V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. With regard tp supply voltage, op amp is used under 18V. The dual supply voltage of 18V should be used for the conduct of this electronic component.
LF353MX Features
supply voltage of 15V
100dB voltage gain
LF353MX Applications
There are a lot of ON Semiconductor LF353MX Instrumentational OP Amps applications.
- Addition operation circuits
- Test and measurement instruments
- Blood pressure sensors
- Precision measurement
- Computer workstations
- Signal transformation
- Communication
- Hand-held batteries
- earphone
- Video amplifiers
