Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Operational Amplifier |
Technology |
JFET |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Operating Supply Voltage |
18V |
Number of Elements |
1 |
Temperature Grade |
COMMERCIAL |
Operating Supply Current |
2mA |
Nominal Supply Current |
3.4mA |
Slew Rate |
13 V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
200pA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
3MHz |
Gain Bandwidth Product |
3MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Max Dual Supply Voltage |
18V |
Low-Bias |
YES |
Micropower |
NO |
Min Dual Supply Voltage |
3.5V |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Power |
NO |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LF411CPE4 Overview
A PDIP case is used to package the op amp. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. A Rail/Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 2mV voltage. Operational amplifier can operate supply current at 2mA. The voltage gain should stay at 106.02dB. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. A temperature greater than 70°C should not be used for the operation of this instrumentation amplifier. This linear amplifier has a total of 1 elements. The operating supply voltage of the buffer op amp is rated at 18V. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
LF411CPE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LF411CPE4 Applications
There are a lot of Texas Instruments LF411CPE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Industrial applications including automation
- Integrator circuits
- Blood pressure sensors
- Home audio systems
- Tablets
- Instrumentation
- Medical instruments
- Radar
- Test equipment