LFE2-20E-5FN484I
| Parameters | |
|---|---|
| RAM Size | 34.5kB |
| Clock Frequency | 311MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 21000 |
| Total RAM Bits | 282624 |
| Number of LABs/CLBs | 2625 |
| Combinatorial Delay of a CLB-Max | 0.358 ns |
| Number of Logic Cells | 20000 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-20 |
| Pin Count | 484 |
| Number of Outputs | 331 |
| Operating Supply Voltage | 1.2V |
| Memory Size | 39.8kB |
| Number of I/O | 331 |
LFE2-20E-5FN484I Overview
A 484-BBGA package is provided with this component. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The I/Os are designed to facilitate a more coherent transfer of data. A fundamental building block consists of 21000 logic elements/cells. Power is provided by a 1.2V-volt supply. This FPGA part belongs to the family of Field Programmable Gate Arrays. The Surface Mount-slot connector on the FPGA module can be connected to the development board. Powered by a 1.14V~1.26V supply voltage, fpga chips is able to operate at high speeds. An FPGA belonging to the ECP2 series is referred to as an FPGA. When operating the machine, it is important to keep the temperature within -40°C~100°C TJ range. In this device, 331 outputs are incorporated in order to provide you with maximum flexibility. A model of this FPGA is contained in Tray for the purpose of saving space. In total, it has 484 terminations on each end. There are 282624 RAM bits that are available with this device. LFE2-20 is the base part number that can be used to identify related parts. For the program to work properly, the RAM si34.5kBe of this FPGA module must reach 34.5kB GB in order to ensure normal operation. The device has 484 pins which are included in the design. A total of 2625 LABs/CLBs are included in this FPGA. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. When operating with the supply voltage of 1.2V, designers can fully make use of its flexibility. In addition to this, it has 484 pins. Typically, it uses a crystal oscillating at 311MHz in order to operate. In this FPGA module, there is a memory of 39.8kB available for storing applications and data. As most of the logic cells for the building blocks are 20000 logic cells, it incorporates a lot of logic.
LFE2-20E-5FN484I Features
331 I/Os
Up to 282624 RAM bits
484 LABs/CLBs
LFE2-20E-5FN484I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-20E-5FN484I FPGAs applications.
- Wired Communications
- Consumer Electronics
- Device controllers
- Automotive advanced driver assistance systems (ADAS)
- Ecosystem
- Security systems
- Audio
- DO-254
- Industrial IoT
- Cryptography
