LFE2-20E-6FN256I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-20 |
| Pin Count | 256 |
| Number of Outputs | 193 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 39.8kB |
| Number of I/O | 193 |
| RAM Size | 34.5kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 21000 |
| Total RAM Bits | 282624 |
| Number of LABs/CLBs | 2625 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 20000 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-20E-6FN256I Overview
A 256-BGA package is provided with this component. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. A total of 193 I/Os are programmed to ensure a more coherent data transfer. In order to construct a fundamental building block, 21000 logic elements/cells are required. In order for the device to operate, a supply voltage of 1.2V volts needs to be provided. In this case, the FPGA part belongs to the Field Programmable Gate Arrays family. An attachment Surface Mount allows the FPGA module to be attached to the development board. Fpga chips operates at a voltage of 1.14V~1.26V and uses a battery to supply power. An FPGA belonging to the ECP2 series is referred to as an FPGA. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~100°C TJ at all times. This device is equipped with 193 separate outputs, which makes it a very versatile device. As a result of space limitations, this FPGA model has been included in Tray. In total, it has a total of 256 terminations. This device is equipped with 282624 RAM bits in terms of its RAM si282624e. Its base part number LFE2-20 can be used to find parts that are related to it. Fpga electronics is important that this FPGA module has a RAM si34.5kBe of 34.5kB in order to ensure that the program will run normally. This cable has 256 pins and is designed to connect to a computer. Fpga electronics contains 2625 LABs/CLBs in an array. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. When operating with the supply voltage of 1.2V, designers can fully make use of its flexibility. Featuring 256 pins in total, it is a versatile device. It usually uses a 357MHz crystal. Programs and data can be stored in the 39.8kB memory embedded in this FPGA module. As most of the logic cells for the building blocks are 20000 logic cells, it incorporates a lot of logic.
LFE2-20E-6FN256I Features
193 I/Os
Up to 282624 RAM bits
256 LABs/CLBs
LFE2-20E-6FN256I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-20E-6FN256I FPGAs applications.
- Automotive Applications
- Scientific Instruments
- DO-254
- OpenCL
- Data Mining
- ADAS
- Automotive
- ASIC prototyping
- Aerospace and Defense
- Security systems
