banner_page

LFE2-20SE-5F256C

1.2V V 2.1mm mm 39.8kB B FPGAs ECP2 Series 256-BGA 1mm mm 256


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-LFE2-20SE-5F256C
  • Package: 256-BGA
  • Datasheet: PDF
  • Stock: 950
  • Description: 1.2V V 2.1mm mm 39.8kB B FPGAs ECP2 Series 256-BGA 1mm mm 256 (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 256-BGA
Number of Pins 256
Operating Temperature 0°C~85°C TJ
Packaging Tray
Published 2012
Series ECP2
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 256
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
HTS Code 8542.39.00.01
Subcategory Field Programmable Gate Arrays
Voltage - Supply 1.14V~1.26V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 225
Supply Voltage 1.2V
Terminal Pitch 1mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LFE2-20
Pin Count 256
Number of Outputs 193
Qualification Status Not Qualified
Operating Supply Voltage 1.2V
Memory Size 39.8kB
Number of I/O 193
RAM Size 34.5kB
Programmable Logic Type FIELD PROGRAMMABLE GATE ARRAY
Number of Logic Elements/Cells 21000
Total RAM Bits 282624
Max Frequency 311MHz
Number of LABs/CLBs 2625
Combinatorial Delay of a CLB-Max 0.358 ns
Number of Logic Cells 20000
Height Seated (Max) 2.1mm
Length 17mm
Width 17mm
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

LFE2-20SE-5F256C Overview


This package is included in the 256-BGA package and is available for purchase. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. A total of 193 I/Os allow data to be transferred in a more coherent manner. In order to construct a fundamental building block, 21000 logic elements/cells are required. It is powered from a supply voltage of 1.2V. This FPGA part belongs to the family of Field Programmable Gate Arrays. By attaching the Surface Mount connector, you can use this FPGA module with your development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the ECP2 series of FPGAs. Fpga chips is necessary to keep the operating temperature wFpga chipshin 0°C~85°C TJ when the device is operating. This device is equipped with 193 separate outputs, which makes it a very versatile device. As a result of space limitations, this FPGA model has been included in Tray. In total, there are a total of 256 terminations on fpga chips. This device is equipped with 282624 RAM bits in terms of its RAM si282624e. Related parts can be found by using its base part number LFE2-20. This FPGA module has a RAM si34.5kBe of 34.5kB that is sufficient to make sure that the program is able to run normally. The device has 256 pins which are included in the design. 2625 LABs and CLBs are built into this FPGA. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. In the case of 1.2V supply voltage, designers can take full advantage of its flexibility. In addition to this, it has 256 pins. Data and programs can be stored in this FPGA module's 39.8kB memory. This FPGA can get as fast as 311MHz. It is composed of 20000 logic cells which serve as the building blocks of the application.

LFE2-20SE-5F256C Features


193 I/Os
Up to 282624 RAM bits
256 LABs/CLBs

LFE2-20SE-5F256C Applications


There are a lot of Lattice Semiconductor Corporation LFE2-20SE-5F256C FPGAs applications.

  • Server Applications
  • Voice recognition
  • Aircraft navigation
  • Scientific Instruments
  • Medical imaging
  • Development Boards and Shields for Microcontrollers
  • Wired Communications
  • Data Center
  • Data center hardware accelerators
  • High Performance Computing

Write a review

Note: HTML is not translated!
    Bad           Good