LFE2-20SE-5FN672I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-20 |
| Pin Count | 672 |
| Number of Outputs | 402 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 39.8kB |
| Number of I/O | 402 |
| RAM Size | 34.5kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 21000 |
| Total RAM Bits | 282624 |
| Max Frequency | 311MHz |
| Number of LABs/CLBs | 2625 |
| Combinatorial Delay of a CLB-Max | 0.358 ns |
| Number of Logic Cells | 20000 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-20SE-5FN672I Overview
A 672-BBGA package is provided with this component. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. There are 402 I/Os for better data transfer. There are 21000 logic elements/cells to form a fundamental building block. It is powered from a supply voltage of 1.2V. This FPGA part belongs to the family of Field Programmable Gate Arrays. FPGA modules can be attached to development boards using a Surface Mount-connector. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the ECP2 series of FPGAs. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~100°C TJ at all times. With this device, you will be able to make use of 402 outputs. This FPGA model is contained in Tray for space saving. As a whole, it has 672 terminations. There are 282624 RAM bits that are available with this device. LFE2-20 is the base part number that can be used to identify related parts. It is crucial that the RAM si34.5kBe of this FPGA module reaches 34.5kB so that the program can run normally. The device has 672 pins which are included in the design. 2625 LABs/CLBs are configured on this FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In the case of 1.2V supply voltage, designers can take full advantage of its flexibility. This device has a pin count of 672 in fpga semiconductor. Data and programs can be stored in this FPGA module's memory of 39.8kB. Fpga semiconductor is possible for this FPGA to reach speeds of up to 311MHz. In order for the building block to work, fpga semiconductor consists of 20000 logic cells.
LFE2-20SE-5FN672I Features
402 I/Os
Up to 282624 RAM bits
672 LABs/CLBs
LFE2-20SE-5FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-20SE-5FN672I FPGAs applications.
- ADAS
- Military Temperature
- Filtering and communication encoding
- Solar Energy
- Industrial,Medical and Scientific Instruments
- Digital signal processing
- Data center search engines
- Industrial IoT
- Cryptography
- Server Applications
