LFE2-35SE-6FN672C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-35 |
| Pin Count | 672 |
| Number of Outputs | 450 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 49.5kB |
| Number of I/O | 450 |
| RAM Size | 41.5kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 32000 |
| Total RAM Bits | 339968 |
| Max Frequency | 357MHz |
| Number of LABs/CLBs | 4000 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 35000 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-35SE-6FN672C Overview
This package is included in the 672-BBGA package and is available for purchase. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. The device has 450 I/O ports for more coherent data transfer. In order to construct a fundamental building block, 32000 logic elements/cells are required. Fpga chips is powered from a supply voltage of 1.2V. The Field Programmable Gate Arrays family of FPGA parts includes this part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. The supply voltage of the device is 1.14V~1.26V , at which it runs. The ECP2 series FPGA is a type of FPGA that belongs to the ECP2 family of FPGAs. Fpga chips is recommended that the operating temperature be kept wFpga chipshin the range 0°C~85°C TJ while the machine is operating. This device is equipped with 450 separate outputs, which makes it a very versatile device. In order to save space, this FPGA model has been contained in Tray. There are a total of 672 terminations. This device has 339968 RAM bits, which is the number of RAM bits that this device offers. Its base part number LFE2-35 can be used to find parts that are related to it. During the configuration of this FPGA module, the RAM si41.5kBe reaches 41.5kB to ensure that the program runs normally. It has a total of 672 pins that are designed for it. An array of 4000 LABs/CLBs is built into the FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. A 1.2V-volt supply allows designers to fully utilize its flexibility. I am going to present you with a device that is equipped with 672 pins. Programs and data can be stored in the 49.5kB memory embedded in this FPGA module. As far as the speed of this FPGA is concerned, it can get up to 357MHz. It incorporates 35000 logic cells used for the building block.
LFE2-35SE-6FN672C Features
450 I/Os
Up to 339968 RAM bits
672 LABs/CLBs
LFE2-35SE-6FN672C Applications
There are a lot of Lattice Semiconductor Corporation LFE2-35SE-6FN672C FPGAs applications.
- Radar and Sensors
- Consumer Electronics
- Data center hardware accelerators
- Medical ultrasounds
- Voice recognition
- Bioinformatics
- Wired Communications
- Image processing
- High Performance Computing
- Aircraft navigation
