Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
672-BBGA |
Number of Pins |
672 |
Operating Temperature |
-40°C~100°C TJ |
Packaging |
Tray |
Published |
2008 |
Series |
ECP2 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
672 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
HTS Code |
8542.39.00.01 |
Subcategory |
Field Programmable Gate Arrays |
Voltage - Supply |
1.14V~1.26V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
250 |
Supply Voltage |
1.2V |
Terminal Pitch |
1mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LFE2-35 |
Pin Count |
672 |
Number of Outputs |
450 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
1.2V |
Memory Size |
49.5kB |
Number of I/O |
450 |
RAM Size |
41.5kB |
Programmable Logic Type |
FIELD PROGRAMMABLE GATE ARRAY |
Number of Logic Elements/Cells |
32000 |
Total RAM Bits |
339968 |
Max Frequency |
357MHz |
Number of LABs/CLBs |
4000 |
Combinatorial Delay of a CLB-Max |
0.331 ns |
Number of Logic Cells |
35000 |
Height Seated (Max) |
2.6mm |
Length |
27mm |
Width |
27mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LFE2-35SE-6FN672I Overview
The package that contains this software is called 672-BBGA. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. The I/Os are designed to facilitate a more coherent transfer of data. To form a fundamental building block, there are 32000 logic elements/cells. Supply voltage is 1.2V volts. There is a Field Programmable Gate Arrays family component in this FPGA part. FPGA modules can be attached to development boards using a Surface Mount-connector. Fpga chips operates at a voltage of 1.14V~1.26V and uses a battery to supply power. FPGAs belonging to the ECP2 series are a type of FPGA that belong to the ECP2 series of FPGAs. Operating temperatures should be maintained within the -40°C~100°C TJ range at all times when the unit is in use. The device has 450 outputs that are integrated into it. It is for space saving reasons that this FPGA model is contained in Tray. In total, it has 672 terminations on each end. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 339968 bFpga chipss. You can find related parts by using the part number LFE2-35, which is its base part number. This FPGA module has a RAM si41.5kBe of 41.5kB that is sufficient to make sure that the program is able to run normally. There are 672 pins on this device. 4000 LABs and CLBs are built into this FPGA. Providing that this FPGA is mounted in Surface Mount, it will be able to perform according to its specifications in a flawless manner. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. A total of 672 pins are included in this device. For storing programs and data, this FPGA module embeds memory 49.5kB. Using this FPGA, you can get speeds up to 357MHz. For the building block, it encompasses 35000 logic cells that make up the logic circuit.
LFE2-35SE-6FN672I Features
450 I/Os
Up to 339968 RAM bits
672 LABs/CLBs
LFE2-35SE-6FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-35SE-6FN672I FPGAs applications.
- ADAS
- Industrial,Medical and Scientific Instruments
- Integrating multiple SPLDs
- Cryptography
- Data Mining
- High Performance Computing
- Data center hardware accelerators
- Telecommunication
- Aerospace and Defense
- Camera time adjustments