LFE2-50E-5FN484I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2010 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-50 |
| Pin Count | 484 |
| Number of Outputs | 339 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 60.4kB |
| Number of I/O | 339 |
| RAM Size | 48.4kB |
| Clock Frequency | 311MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 48000 |
| Total RAM Bits | 396288 |
| Number of LABs/CLBs | 6000 |
| Combinatorial Delay of a CLB-Max | 0.358 ns |
| Number of Logic Cells | 50000 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-50E-5FN484I Overview
Fpga chips is supplied in the 484-BBGA package. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. The I/Os are designed to facilitate a more coherent transfer of data. Logic elements/cells form the fundamental building block of a computer. Power is provided by a 1.2V-volt supply. A Field Programmable Gate Arrays-series FPGA part. This FPGA module can be attached to the development board with a Surface Mount. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the ECP2 series of FPGAs. Fpga chips is important to maintain the operating temperature wFpga chipshin the range of -40°C~100°C TJ when operating the machine. This device is equipped with 339 separate outputs, which makes it a very versatile device. A model of this FPGA is contained in Tray for the purpose of saving space. As a whole, it has 484 terminations. This device is equipped with 396288 RAM bits in terms of its RAM si396288e. If you are looking for related parts, you can use the base part number LFE2-50 as a starting point. The RAM si48.4kBe of this FPGA module reaches 48.4kB so as to guarantee the normal operation of the program during operation. In order to make it work, 484 pins have been designed. The FPGA is built as an array of 6000 latches or CLBs. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. I am going to present you with a device that is equipped with 484 pins. Fpga semiconductor typically uses a crystal oscillating at 311MHz. A memory of 60.4kB is embedded in this FPGA module for storing data and programs. As most of the logic cells for the building blocks are 50000 logic cells, it incorporates a lot of logic.
LFE2-50E-5FN484I Features
339 I/Os
Up to 396288 RAM bits
484 LABs/CLBs
LFE2-50E-5FN484I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-50E-5FN484I FPGAs applications.
- Medical ultrasounds
- Consumer Electronics
- Ecosystem
- Data Center
- Radar and Sensors
- Wired Communications
- Medical Electronics
- Software-defined radio
- Voice recognition
- Device controllers
