Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
672-BBGA |
Number of Pins |
672 |
Operating Temperature |
-40°C~100°C TJ |
Packaging |
Tray |
Published |
2008 |
Series |
ECP2 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
672 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
HTS Code |
8542.39.00.01 |
Subcategory |
Field Programmable Gate Arrays |
Voltage - Supply |
1.14V~1.26V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
250 |
Supply Voltage |
1.2V |
Terminal Pitch |
1mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LFE2-50 |
Pin Count |
672 |
Number of Outputs |
500 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
1.2V |
Memory Size |
60.4kB |
Number of I/O |
500 |
RAM Size |
48.4kB |
Clock Frequency |
311MHz |
Programmable Logic Type |
FIELD PROGRAMMABLE GATE ARRAY |
Number of Logic Elements/Cells |
48000 |
Total RAM Bits |
396288 |
Number of LABs/CLBs |
6000 |
Combinatorial Delay of a CLB-Max |
0.358 ns |
Height Seated (Max) |
2.6mm |
Length |
27mm |
Width |
27mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LFE2-50E-5FN672I Overview
The package that contains this software is called 672-BBGA. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. There are 500 I/Os for better data transfer. There are 48000 logic elements/cells to form a fundamental building block. Fpga chips is powered from a supply voltage of 1.2V. An FPGA part from the Field Programmable Gate Arrays family. The Surface Mount-slot connector on the FPGA module can be connected to the development board. The supply voltage of the device is 1.14V~1.26V , at which it runs. It is a type of FPGA belonging to the ECP2 seies. Fpga chips is recommended that the operating temperature be kept wFpga chipshin the range -40°C~100°C TJ while the machine is operating. A device such as this one has 500 outputs built into it. In order to save space, this FPGA model has been contained in Tray. Total terminations are 672. A device like this one offers 396288 RAM bits, which is a considerable amount of memory. You can find related parts by using the part number LFE2-50, which is its base part number. Fpga electronics is important that this FPGA module has a RAM si48.4kBe of 48.4kB in order to ensure that the program will run normally. The device has 672 pins which are included in the design. 6000 LABs/CLBs are configured on this FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. Fpga semiconductor is equipped wfpga semiconductorh 672 pin count. Fpga semiconductor typically uses a crystal oscillating at 311MHz. Data and programs can be stored in this FPGA module's memory of 60.4kB.
LFE2-50E-5FN672I Features
500 I/Os
Up to 396288 RAM bits
672 LABs/CLBs
LFE2-50E-5FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-50E-5FN672I FPGAs applications.
- Telecommunication
- Software-defined radio
- Secure Communication
- Consumer Electronics
- ADAS
- Medical Applications
- Automotive driver's assistance
- Bioinformatics
- Broadcast
- Wired Communications