LFE2-50SE-6FN672C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-50 |
| Pin Count | 672 |
| Number of Outputs | 500 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 60.4kB |
| Number of I/O | 500 |
| RAM Size | 48.4kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 48000 |
| Total RAM Bits | 396288 |
| Max Frequency | 320MHz |
| Number of LABs/CLBs | 6000 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-50SE-6FN672C Overview
A 672-BBGA package is provided with this component. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. 500 I/Os are available for transferring data more efficiently. A fundamental building block consists of 48000 logic elements/cells. 1.2V volts power it. Part of the Field Programmable Gate Arrays family, this FPGA part is a programmable gate array. This FPGA module can be attached to the development board with a Surface Mount. Fpga chips operates at a voltage of 1.14V~1.26V and uses a battery to supply power. FPGAs belonging to the ECP2 series are a type of FPGA that belong to the ECP2 series of FPGAs. During the operation of the system, the operating temperature should remain within the range of 0°C~85°C TJ. During the installation of this device, 500 outputs were incorporated. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. In total, it has 672 terminations on each end. This device is equipped with 396288 RAM bits in terms of its RAM si396288e. LFE2-50 is the base part number that can be used to identify related parts. During the configuration of this FPGA module, the RAM si48.4kBe reaches 48.4kB to ensure that the program runs normally. Fpga electronics is designed wfpga electronics h 672 pins. Fpga electronics contains 6000 LABs/CLBs in an array. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. There are a total of 672 pins on this device. There is a memory of 60.4kB embedded inside this FPGA module that can be used to store programs and data. It is possible to achieve a speed of up to 320MHz with this FPGA.
LFE2-50SE-6FN672C Features
500 I/Os
Up to 396288 RAM bits
672 LABs/CLBs
LFE2-50SE-6FN672C Applications
There are a lot of Lattice Semiconductor Corporation LFE2-50SE-6FN672C FPGAs applications.
- Telecommunication
- Software-defined radio
- Medical Electronics
- Bioinformatics
- Camera time adjustments
- DO-254
- Distributed Monetary Systems
- Medical ultrasounds
- Automotive Applications
- Secure Communication
