LFE2-70E-6FN900C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 900-BBGA |
| Number of Pins | 900 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 900 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-70 |
| Pin Count | 900 |
| Number of Outputs | 583 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 146kB |
| Number of I/O | 583 |
| RAM Size | 129kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 68000 |
| Total RAM Bits | 1056768 |
| Number of LABs/CLBs | 8500 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 70000 |
| Height Seated (Max) | 2.6mm |
| Length | 31mm |
| Width | 31mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-70E-6FN900C Overview
This package is included in the 900-BBGA package and is available for purchase. The FIELD PROGRAMMABLE GATE ARRAY-series of FPGAs are composed of this type. The device has 583 I/O ports for more coherent data transfer. A fundamental building block is made up of 68000 logic elements/cells. In order for the device to operate, a supply voltage of 1.2V volts needs to be provided. This FPGA part belongs to the family of Field Programmable Gate Arrays. By attaching the Surface Mount connector, you can use this FPGA module with your development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. As part of the ECP2 series of FPGAs, it is a type of FPGA. While operating, the operating temperature should be kept within a range of 0°C~85°C TJ. A total of 583 outputs are incorporated into this device. As a space-saving measure, this FPGA model is contained within Tray. In total, it has a total of 900 terminations. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 1056768 bFpga chipss. In order to find related parts, use the part number LFE2-70 as a base. During the configuration of this FPGA module, the RAM si129kBe reaches 129kB to ensure that the program runs normally. In this case, 900 pins are used in the design. 8500 LABs/CLBs are configured on this FPGA. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. The 1.2V supply voltage provides designers with full flexibility in their designs. Fpga semiconductor is equipped wfpga semiconductorh 900 pin count. Typically, fpga semiconductor uses a crystal oscillating at 357MHz . In this FPGA module, there is a memory of 146kB that can be used to store programs and data. For the building block of this system, 70000 logic cells are included.
LFE2-70E-6FN900C Features
583 I/Os
Up to 1056768 RAM bits
900 LABs/CLBs
LFE2-70E-6FN900C Applications
There are a lot of Lattice Semiconductor Corporation LFE2-70E-6FN900C FPGAs applications.
- Automotive advanced driver assistance systems (ADAS)
- Industrial IoT
- Electronic Warfare
- Server Applications
- Medical ultrasounds
- Data center hardware accelerators
- Software-defined radios
- Telecommunication
- Broadcast
- Secure Communication
