LFE2M100E-6FN900I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 900-BBGA |
| Number of Pins | 900 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 900 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M100 |
| Pin Count | 900 |
| Number of Outputs | 416 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 688.8kB |
| Number of I/O | 416 |
| RAM Size | 663.5kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 95000 |
| Total RAM Bits | 5435392 |
| Number of LABs/CLBs | 11875 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 100000 |
| Height Seated (Max) | 2.6mm |
| Length | 31mm |
| Width | 31mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2M100E-6FN900I Overview
As part of the 900-BBGA package, it is included. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. A total of 416 I/Os are programmed to ensure a more coherent data transfer. There are 95000 logic elements/cells to form a fundamental building block. An electrical supply voltage of 1.2V powers it. Field Programmable Gate Arrays family FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. In order for it to operate, the supply voltage must be 1.14V~1.26V . It is a type of FPGA belonging to the ECP2M seies. As far as the operating temperature is concerned, it should be kept within -40°C~100°C TJ when operating. In order to make this device as versatile as possible, there are 416 different outputs included. As a result of space limitations, this FPGA model has been included in Tray. In total, it has 900 terminations on each end. There are 5435392 RAM bits that are available with this device. Parts related to this part can be found using its base part number LFE2M100. It is crucial that the RAM si663.5kBe of this FPGA module reaches 663.5kB so that the program can run normally. There are 900 pins on this device. A total of 11875 LABs/CLBs make up this FPGA array. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. A 1.2V-volt supply allows designers to fully utilize its flexibility. With a total of 900 pins, it is equipped with a high level of security. Usually, fpga semiconductor uses a 357MHz crystal. In this FPGA module, there is a memory of 688.8kB available for storing applications and data. It incorporates 100000 logic cells used for the building block.
LFE2M100E-6FN900I Features
416 I/Os
Up to 5435392 RAM bits
900 LABs/CLBs
LFE2M100E-6FN900I Applications
There are a lot of Lattice Semiconductor Corporation LFE2M100E-6FN900I FPGAs applications.
- High Performance Computing
- Filtering and communication encoding
- Camera time adjustments
- Industrial,Medical and Scientific Instruments
- Distributed Monetary Systems
- Aircraft navigation
- Medical ultrasounds
- OpenCL
- Voice recognition
- Solar Energy
