LFE2M35E-7FN256C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M35 |
| Pin Count | 256 |
| Number of Outputs | 140 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 271.5kB |
| Number of I/O | 140 |
| RAM Size | 262.6kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 34000 |
| Total RAM Bits | 2151424 |
| Max Frequency | 420MHz |
| Number of LABs/CLBs | 4250 |
| Combinatorial Delay of a CLB-Max | 0.304 ns |
| Number of Logic Cells | 35000 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2M35E-7FN256C Overview
As part of the 256-BGA package, it is included. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The I/Os are designed to facilitate a more coherent transfer of data. In order to construct a fundamental building block, 34000 logic elements/cells are required. The supply voltage is 1.2V volts. Field Programmable Gate Arrays family FPGA part. An attachment Surface Mount allows the FPGA module to be attached to the development board. Fpga chips operates wFpga chipsh a supply voltage of 1.14V~1.26V. It is a type of FPGA that belongs to the ECP2M series of FPGAs. While operating, the operating temperature should be kept within a range of 0°C~85°C TJ. This device is equipped with 140 separate outputs, which makes it a very versatile device. Fpga chips is designed to maximiTraye space efficiency by containing the FPGA model in Tray. In total, it has 256 terminations on each end. The RAM bits that this device offer is 2151424. Its base part number LFE2M35 can be used to find parts that are related to it. It is crucial that the RAM si262.6kBe of this FPGA module reaches 262.6kB so that the program can run normally. In order to make it work, 256 pins have been designed. An array of 4250 LABs/CLBs is built into the FPGA. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. In operation with 1.2V, designers can take advantage of its flexibility to the fullest extent. A total of 256 pins are included in this device. A memory of 271.5kB is embedded in this FPGA module for storing data and programs. Fpga semiconductor is possible for this FPGA to reach speeds of up to 420MHz. It incorporates 35000 logic cells used for the building block.
LFE2M35E-7FN256C Features
140 I/Os
Up to 2151424 RAM bits
256 LABs/CLBs
LFE2M35E-7FN256C Applications
There are a lot of Lattice Semiconductor Corporation LFE2M35E-7FN256C FPGAs applications.
- DO-254
- Software-defined radio
- Image processing
- Military Temperature
- Automotive
- Development Boards and Shields for Microcontrollers
- Camera time adjustments
- Data center hardware accelerators
- ADAS
- Space Applications
