LFE2M50E-6FN672I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M50 |
| Pin Count | 672 |
| Number of Outputs | 372 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 531kB |
| Number of I/O | 372 |
| RAM Size | 518.4kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 48000 |
| Total RAM Bits | 4246528 |
| Number of LABs/CLBs | 6000 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 50000 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2M50E-6FN672I Overview
The package that contains this software is called 672-BBGA. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. A total of 372 I/Os allow data to be transferred in a more coherent manner. A fundamental building block contains 48000 logic elements or cells. In order to operate fpga chips, a voltage supply of 1.2V volts is required. There is a Field Programmable Gate Arrays family component in this FPGA part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. Fpga chips operates wFpga chipsh a supply voltage of 1.14V~1.26V. An FPGA belonging to the ECP2M series is referred to as an FPGA. Fpga chips is recommended that the operating temperature be kept wFpga chipshin the range -40°C~100°C TJ while the machine is operating. A device such as this one has 372 outputs built into it. It is for space saving reasons that this FPGA model is contained in Tray. In total, it has a total of 672 terminations. A device like this one offers 4246528 RAM bits, which is a considerable amount of memory. For related parts, use its base part number LFE2M50. The RAM si518.4kBe of this FPGA module reaches 518.4kB so as to guarantee the normal operation of the program during operation. The device has 672 pins which are included in the design. 6000 LABs/CLBs are integrated into this FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. A 1.2V-volt supply allows designers to fully utilize its flexibility. I am going to present you with a device that is equipped with 672 pins. It usually uses a 357MHz crystal. There is a memory of 531kB embedded inside this FPGA module that can be used to store programs and data. Fpga semiconductor incorporates 50000 logic cells used for the building block.
LFE2M50E-6FN672I Features
372 I/Os
Up to 4246528 RAM bits
672 LABs/CLBs
LFE2M50E-6FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE2M50E-6FN672I FPGAs applications.
- Distributed Monetary Systems
- Solar Energy
- Industrial IoT
- Camera time adjustments
- Data Mining
- Aircraft navigation
- Automotive
- Radar and Sensors
- Security systems
- Automotive advanced driver assistance systems (ADAS)
