LFE2M50SE-7FN484C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M50 |
| Pin Count | 484 |
| Number of Outputs | 270 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 531kB |
| Number of I/O | 270 |
| RAM Size | 518.4kB |
| Clock Frequency | 420MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 48000 |
| Total RAM Bits | 4246528 |
| Number of LABs/CLBs | 6000 |
| Combinatorial Delay of a CLB-Max | 0.304 ns |
| Number of Logic Cells | 50000 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2M50SE-7FN484C Overview
This package is included in the 484-BBGA package and is available for purchase. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. 270 I/Os are available for transferring data more efficiently. In order to construct a fundamental building block, 48000 logic elements/cells are required. Supply voltage is 1.2V volts. There is a Field Programmable Gate Arrays family component in this FPGA part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. The supply voltage of the device is 1.14V~1.26V , at which it runs. An FPGA belonging to the ECP2M series is referred to as an FPGA. As far as the operating temperature is concerned, it should be kept within 0°C~85°C TJ when operating. During the installation of this device, 270 outputs were incorporated. As a space-saving measure, this FPGA model is contained within Tray. In total, the terminations of this piece are 484. The RAM bits that are offered by this fpga chips are 4246528. Related parts can be found by using its base part number LFE2M50. The FPGA module's RAM si518.4kBe reaches 518.4kB in order to ensure that the program operates in a normal manner. In this case, there are 484 pins on the board. 6000 LABs/CLBs are configured on this FPGA. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. As far as the pin count is concerned, it has 484 pins. It usually uses a crystal oscillating at a frequency of 420MHz in order to do its work. A memory of 531kB is embedded in this FPGA module for storing data and programs. In order for the building block to work, fpga semiconductor consists of 50000 logic cells.
LFE2M50SE-7FN484C Features
270 I/Os
Up to 4246528 RAM bits
484 LABs/CLBs
LFE2M50SE-7FN484C Applications
There are a lot of Lattice Semiconductor Corporation LFE2M50SE-7FN484C FPGAs applications.
- Ecosystem
- Secure Communication
- Defense Applications
- Military Temperature
- Military DSP
- Camera time adjustments
- Device controllers
- Embedded Vision
- Electronic Warfare
- Data center hardware accelerators
