LFE2M70E-6FN1152C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 1152-BBGA |
| Number of Pins | 1152 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M70 |
| Number of Outputs | 436 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 584.9kB |
| Number of I/O | 436 |
| RAM Size | 566.8kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 67000 |
| Total RAM Bits | 4642816 |
| Number of LABs/CLBs | 8375 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 70000 |
| Height Seated (Max) | 2.6mm |
| Length | 35mm |
| Width | 35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2M70E-6FN1152C Overview
The package that contains this software is called 1152-BBGA. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. The device has 436 I/O ports for more coherent data transfer. A fundamental building block consists of 67000 logic elements/cells. Supply voltage is 1.2V volts. Field Programmable Gate Arrays family FPGA part. With a Surface Mount connector, this FPGA module can be attached to the development board. In order for it to operate, the supply voltage must be 1.14V~1.26V . There are many types of FPGAs in the ECP2M series, this is one of them. Operating temperatures should be maintained within the 0°C~85°C TJ range at all times when the unit is in use. In this device, there are 436 outputs that can be used. Using the Tray layout, this FPGA model can be contained in a very small amount of space. A device like this one offers 4642816 RAM bits, which is a considerable amount of memory. Its base part number LFE2M70 can be used to find parts that are related to it. It is crucial that the RAM si566.8kBe of this FPGA module reaches 566.8kB so that the program can run normally. In order to make it work, 1152 pins have been designed. An array of 8375 LABs/CLBs is built into the FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. Its flexibility is fully utilized when operated with a supply voltage of 1.2V. Usually, fpga semiconductor uses a 357MHz crystal. In this FPGA module, there is a memory of 584.9kB available for storing applications and data. For the building block, it incorporates 70000 logic cells that are used to make it work.
LFE2M70E-6FN1152C Features
436 I/Os
Up to 4642816 RAM bits
1152 LABs/CLBs
LFE2M70E-6FN1152C Applications
There are a lot of Lattice Semiconductor Corporation LFE2M70E-6FN1152C FPGAs applications.
- Aerospace and Defense
- Automotive advanced driver assistance systems (ADAS)
- Automotive driver's assistance
- Cryptography
- ADAS
- Automotive Applications
- Consumer Electronics
- Aircraft navigation
- Solar Energy
- Medical Electronics
