LFE3-150EA-6FN672C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE3-150 |
| Pin Count | 672 |
| Number of Outputs | 380 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Number of I/O | 380 |
| RAM Size | 856.3kB |
| Clock Frequency | 375MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 149000 |
| Total RAM Bits | 7014400 |
| Number of LABs/CLBs | 18625 |
| Combinatorial Delay of a CLB-Max | 0.379 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE3-150EA-6FN672C Overview
The package that contains this software is called 672-BBGA. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. This device features 380 I/Os in order to transfer data in a more efficient manner. In order to construct a fundamental building block, 149000 logic elements/cells are required. 1.2V volts power it. The Field Programmable Gate Arrays family of FPGA parts includes this part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. In order for it to operate, the supply voltage must be 1.14V~1.26V . An FPGA belonging to the ECP3 series is referred to as an FPGA. Fpga chips is important to maintain the operating temperature wFpga chipshin the range of 0°C~85°C TJ when operating the machine. A device such as this one has 380 outputs built into it. In order to save space, this FPGA model has been contained in Tray. Total terminations are 672. This device is equipped with 7014400 RAM bits in terms of its RAM si7014400e. In order to find related parts, use the part number LFE3-150 as a base. Fpga electronics is important that this FPGA module has a RAM si856.3kBe of 856.3kB in order to ensure that the program will run normally. In order to make it work, 672 pins have been designed. An array of 18625 LABs/CLBs is built into the FPGA. According to its specifications, this FPGA will be able to work fantastically as long as it is mounted in Surface Mount. In the case of 1.2V supply voltage, designers can take full advantage of its flexibility. The device has a total of 672 pins on fpga semiconductor. Typically, fpga semiconductor uses a crystal oscillating at 375MHz .
LFE3-150EA-6FN672C Features
380 I/Os
Up to 7014400 RAM bits
672 LABs/CLBs
LFE3-150EA-6FN672C Applications
There are a lot of Lattice Semiconductor Corporation LFE3-150EA-6FN672C FPGAs applications.
- Bioinformatics
- ASIC prototyping
- Image processing
- Scientific Instruments
- High Performance Computing
- Ecosystem
- Cryptography
- Enterprise networking
- Telecommunication
- Wireless Communications
