LFE3-17EA-7MG328I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 328-LFBGA, CSBGA |
| Number of Pins | 328 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 328 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE3-17 |
| Pin Count | 328 |
| Number of Outputs | 116 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 92kB |
| Operating Supply Current | 49.4mA |
| Number of I/O | 116 |
| RAM Size | 87.5kB |
| Clock Frequency | 420MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 17000 |
| Total RAM Bits | 716800 |
| Number of LABs/CLBs | 2125 |
| Combinatorial Delay of a CLB-Max | 0.335 ns |
| Height Seated (Max) | 1.5mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE3-17EA-7MG328I Overview
As part of the 328-LFBGA, CSBGA package, it is included. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. The I/Os are designed to facilitate a more coherent transfer of data. The basic building blocks of logic contain 17000 logic elements/cells. Supply voltage is 1.2V volts. Part of the Field Programmable Gate Arrays family, this FPGA part is a programmable gate array. By attaching the Surface Mount connector, you can use this FPGA module with your development board. In order for it to operate, the supply voltage must be 1.14V~1.26V . The ECP3 series FPGA is a type of FPGA that belongs to the ECP3 family of FPGAs. Operating temperatures should be maintained within the -40°C~100°C TJ range at all times when the unit is in use. This device is equipped with 116 separate outputs, which makes it a very versatile device. As a result of space limitations, this FPGA model has been included in Tray. In total, there are a total of 328 terminations on fpga chips. The RAM bits that this device offer is 716800. For related parts, use its base part number LFE3-17. The FPGA module's RAM si87.5kBe reaches 87.5kB in order to ensure that the program operates in a normal manner. Fpga electronics is designed wfpga electronics h 328 pins. 2125 LABs and CLBs are built into this FPGA. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. A 1.2V-volt supply allows designers to fully utilize its flexibility. Fpga semiconductor is equipped wfpga semiconductorh 328 pin count. It usually uses a 420MHz crystal. There is a memory of 92kB embedded inside this FPGA module that can be used to store programs and data. This device uses a 49.4mA supply current to operate.
LFE3-17EA-7MG328I Features
116 I/Os
Up to 716800 RAM bits
328 LABs/CLBs
LFE3-17EA-7MG328I Applications
There are a lot of Lattice Semiconductor Corporation LFE3-17EA-7MG328I FPGAs applications.
- Software-defined radios
- Scientific Instruments
- Defense Applications
- Video & Image Processing
- Medical imaging
- Industrial IoT
- Embedded Vision
- Development Boards and Shields for Microcontrollers
- Electronic Warfare
- Consumer Electronics
