LFE3-35EA-7FN484C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | ECP3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE3-35 |
| Pin Count | 484 |
| Number of Outputs | 295 |
| Operating Supply Voltage | 1.2V |
| Memory Size | 174.4kB |
| Operating Supply Current | 18mA |
| Number of I/O | 295 |
| RAM Size | 165.9kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 33000 |
| Total RAM Bits | 1358848 |
| Max Frequency | 420MHz |
| Number of LABs/CLBs | 4125 |
| Combinatorial Delay of a CLB-Max | 0.335 ns |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE3-35EA-7FN484C Overview
In the 484-BBGA package, you will find fpga chips. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The I/Os are designed to facilitate a more coherent transfer of data. In order to construct a fundamental building block, 33000 logic elements/cells are required. In order for the device to operate, a supply voltage of 1.2V volts needs to be provided. Field Programmable Gate Arrays family FPGA part. An FPGA module can be attached to a development board with a Surface Mount-pin. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. The ECP3 series FPGA is a type of FPGA that belongs to the ECP3 family of FPGAs. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~85°C TJ at all times. A total of 295 outputs are incorporated into this device. As a space-saving measure, this FPGA model is contained within Tray. In total, it has a total of 484 terminations. This device has 1358848 RAM bits, which is the number of RAM bits that this device offers. Parts related to this part can be found using its base part number LFE3-35. This FPGA module has a RAM si165.9kBe of 165.9kB that is sufficient to make sure that the program is able to run normally. The device has 484 pins which are included in the design. Fpga electronics contains 4125 LABs/CLBs in an array. In my opinion, this FPGA could produce fantastic results if mounted in Surface Mount, provided that its specifications are followed. When operating with the supply voltage of 1.2V, designers can fully make use of its flexibility. I am going to present you with a device that is equipped with 484 pins. There is a memory of 174.4kB embedded inside this FPGA module that can be used to store programs and data. In fact, this FPGA is capable of reaching a speed of 420MHz. This device uses a 18mA supply current to operate.
LFE3-35EA-7FN484C Features
295 I/Os
Up to 1358848 RAM bits
484 LABs/CLBs
LFE3-35EA-7FN484C Applications
There are a lot of Lattice Semiconductor Corporation LFE3-35EA-7FN484C FPGAs applications.
- Voice recognition
- Medical Electronics
- Server Applications
- Telecommunication
- Automotive driver's assistance
- Space Applications
- Embedded Vision
- Artificial intelligence (AI)
- Distributed Monetary Systems
- Computer hardware emulation
