LFE3-95EA-7FN672I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | ECP3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE3-95 |
| Pin Count | 672 |
| Number of Outputs | 380 |
| Operating Supply Voltage | 1.2V |
| Memory Size | 576kB |
| Operating Supply Current | 30.6mA |
| Number of I/O | 380 |
| RAM Size | 552.5kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 92000 |
| Total RAM Bits | 4526080 |
| Max Frequency | 420MHz |
| Number of LABs/CLBs | 11500 |
| Combinatorial Delay of a CLB-Max | 0.335 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE3-95EA-7FN672I Overview
The package that contains this software is called 672-BBGA. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. A total of 380 I/Os allow data to be transferred in a more coherent manner. The basic building blocks of logic contain 92000 logic elements/cells. It is powered from a supply voltage of 1.2V. There is a Field Programmable Gate Arrays family component in this FPGA part. FPGA modules can be attached to development boards using a Surface Mount-connector. Powered by a 1.14V~1.26V supply voltage, fpga chips is able to operate at high speeds. FPGAs belonging to the ECP3 series are a type of FPGA that belong to the ECP3 series of FPGAs. As far as the operating temperature is concerned, it should be kept within -40°C~100°C TJ when operating. In order to make this device as versatile as possible, there are 380 different outputs included. Using the Tray layout, this FPGA model can be contained in a very small amount of space. As a whole, it has 672 terminations. There are 4526080 RAM bits that are available with this device. For related parts, use its base part number LFE3-95. Fpga electronics is important that this FPGA module has a RAM si552.5kBe of 552.5kB in order to ensure that the program will run normally. In this case, 672 pins are used in the design. 11500 LABs and CLBs are built into this FPGA. Providing that this FPGA is mounted in Surface Mount, it will be able to perform according to its specifications in a flawless manner. Designers can fully utilize its flexibility with 1.2V supply voltage. There are a total of 672 pins on this device. Programs and data can be stored in the 576kB memory embedded in this FPGA module. This FPGA can get as fast as 420MHz. A 30.6mA supply current is used for its operation.
LFE3-95EA-7FN672I Features
380 I/Os
Up to 4526080 RAM bits
672 LABs/CLBs
LFE3-95EA-7FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE3-95EA-7FN672I FPGAs applications.
- Digital signal processing
- Security systems
- Telecommunication
- Data center hardware accelerators
- Medical imaging
- Enterprise networking
- Server Applications
- Automotive
- Medical Electronics
- Artificial intelligence (AI)
