LFE3-95EA-8FN672I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | ECP3 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE3-95 |
| Pin Count | 672 |
| Number of Outputs | 380 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 576kB |
| Operating Supply Current | 18mA |
| Number of I/O | 380 |
| RAM Size | 552.5kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 92000 |
| Total RAM Bits | 4526080 |
| Max Frequency | 500MHz |
| Number of LABs/CLBs | 11500 |
| Combinatorial Delay of a CLB-Max | 0.281 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE3-95EA-8FN672I Overview
The package that contains this software is called 672-BBGA. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. The I/Os are designed to facilitate a more coherent transfer of data. To form a fundamental building block, there are 92000 logic elements/cells. The supply voltage is 1.2V volts. A Field Programmable Gate Arrays-series FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. Powered by a 1.14V~1.26V supply voltage, fpga chips is able to operate at high speeds. An FPGA belonging to the ECP3 series is referred to as an FPGA. During the operation of the system, the operating temperature should remain within the range of -40°C~100°C TJ. In this device, 380 outputs are incorporated in order to provide you with maximum flexibility. This FPGA model is contained in Tray for space saving. In total, it has 672 terminations on each end. The RAM bits that are offered by this fpga chips are 4526080. LFE3-95 is the base part number that can be used to identify related parts. During the configuration of this FPGA module, the RAM si552.5kBe reaches 552.5kB to ensure that the program runs normally. In this case, there are 672 pins on the board. A total of 11500 LABs/CLBs make up this FPGA array. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. Designers can fully utilize its flexibility with 1.2V supply voltage. With a total of 672 pins, it is equipped with a high level of security. Data and programs can be stored in this FPGA module's memory of 576kB. This FPGA can get as fast as 500MHz. A 18mA supply current is used for its operation.
LFE3-95EA-8FN672I Features
380 I/Os
Up to 4526080 RAM bits
672 LABs/CLBs
LFE3-95EA-8FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE3-95EA-8FN672I FPGAs applications.
- Consumer Electronics
- Distributed Monetary Systems
- Camera time adjustments
- Industrial,Medical and Scientific Instruments
- Software-defined radios
- Broadcast
- Space Applications
- Device controllers
- Telecommunication
- Medical Electronics
