LFXP2-17E-6FT256C
| Parameters | |
|---|---|
| Number of Outputs | 201 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.33.3V |
| Memory Size | 38.9kB |
| Number of I/O | 201 |
| RAM Size | 34.5kB |
| Clock Frequency | 435MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 17000 |
| Total RAM Bits | 282624 |
| Number of LABs/CLBs | 2125 |
| Combinatorial Delay of a CLB-Max | 0.399 ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | XP2 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFXP2-17 |
| Pin Count | 256 |
LFXP2-17E-6FT256C Overview
Fpga chips is supplied in the 256-LBGA package. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. The device has 201 I/O ports for more coherent data transfer. A fundamental building block consists of 17000 logic elements/cells. It is powered from a supply voltage of 1.2V. The Field Programmable Gate Arrays family of FPGAs includes this part. An FPGA module can be attached to a development board with a Surface Mount-pin. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. As part of the XP2 series of FPGAs, it is a type of FPGA. The operating temperature should be kept at 0°C~85°C TJ when operating. In this device, there are 201 outputs that can be used. As a space-saving measure, this FPGA model is contained within Tray. As a whole, it has 256 terminations. As far as the RAM bits are concerned, this device offers you a total of 282624. You can find related parts by using the part number LFXP2-17, which is its base part number. During the configuration of this FPGA module, the RAM si34.5kBe reaches 34.5kB to ensure that the program runs normally. It has a total of 256 pins that are designed for it. 2125 LABs/CLBs are configured on this FPGA. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. Designers can fully utilize its flexibility with 1.2V supply voltage. This is a battery operated device that operates on 1.21.2/3.33.3V. There are a total of 256 pins on this device. Fpga semiconductor typically uses a crystal oscillating at 435MHz. This FPGA module embeds a memory of 38.9kB available for storing programs and data.
LFXP2-17E-6FT256C Features
201 I/Os
Up to 282624 RAM bits
256 LABs/CLBs
LFXP2-17E-6FT256C Applications
There are a lot of Lattice Semiconductor Corporation LFXP2-17E-6FT256C FPGAs applications.
- Device controllers
- Bioinformatics
- Consumer Electronics
- Medical Applications
- Image processing
- Digital signal processing
- Military DSP
- Wired Communications
- Data Center
- OpenCL
