LFXP2-40E-5FN672C
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 311MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFXP2-40 |
| Pin Count | 672 |
| Number of Outputs | 540 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.33.3V |
| Memory Size | 121kB |
| Number of I/O | 540 |
| RAM Size | 110.6kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 40000 |
| Total RAM Bits | 906240 |
| Number of LABs/CLBs | 5000 |
| Number of Macro Cells | 20000 |
| Combinatorial Delay of a CLB-Max | 0.494 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | XP2 |
| JESD-609 Code | e1 |
| Part Status | Active |
LFXP2-40E-5FN672C Overview
As part of the 672-BBGA package, it is included. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. A total of 540 I/Os allow data to be transferred in a more coherent manner. Logic blocks consist of 40000 logic elements/cells. 1.2V volts power it. An FPGA part from the Field Programmable Gate Arrays family. This FPGA module can be attached to the development board with a Surface Mount. Powered by a 1.14V~1.26V supply voltage, fpga chips is able to operate at high speeds. It is a type of FPGA that belongs to the XP2 series of FPGAs. When operating the machine, it is important to keep the temperature within 0°C~85°C TJ range. During the installation of this device, 540 outputs were incorporated. A model of this FPGA is contained in Tray for the purpose of saving space. In total, it has a total of 672 terminations. This device is equipped with 906240 RAM bits in terms of its RAM si906240e. Its base part number LFXP2-40 can be used to find parts that are related to it. This FPGA module has a RAM si110.6kBe of 110.6kB that is sufficient to make sure that the program is able to run normally. The device is designed with 672 pins in total. 5000 LABs/CLBs are integrated into this FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. A 1.2V-volt supply allows designers to fully utilize its flexibility. There is a 1.21.2/3.33.3V power supply that is required to operate it. As far as the pin count is concerned, it has 672 pins. There is a memory of 121kB embedded in this FPGA module, which can be used for storing programs and data. Powered by a 311MHz-frequency motor, it delivers high efficiency. There are 20000 macro cells which make up this CPLD and they serve as the main components of the device.
LFXP2-40E-5FN672C Features
540 I/Os
Up to 906240 RAM bits
672 LABs/CLBs
Operating from a frequency of 311MHz
LFXP2-40E-5FN672C Applications
There are a lot of Lattice Semiconductor Corporation LFXP2-40E-5FN672C FPGAs applications.
- Consumer Electronics
- Electronic Warfare
- OpenCL
- Automotive
- Telecommunication
- Radar and Sensors
- Data Center
- DO-254
- Software-defined radio
- Medical Applications
