LM101AH
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-205AA, TO-5-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.2W |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM101 |
| Pin Count | 8 |
| Power Supplies | +-5/+-20V |
| Number of Channels | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 1.2W |
| Output Current | 25mA |
| Max Supply Current | 3mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 10V~44V ±5V~22V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 700μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9.121518MV |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
LM101AH Overview
In order to protect the op amps, a TO-205AA, TO-5-8 Metal Can case is used. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Bulk case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. Op amp ic rates 2mV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -55°C~125°C. You can run this op amp ic on 1.8mA . The voltage gain should stay at 104.08dB. There are a total of 1 channels available on the op amps.
LM101AH Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM101AH Applications
There are a lot of Texas Instruments LM101AH Instrumentational OP Amps applications.
- Hand-held batteries
- Power control
- Differentiator circuits
- Switching amplifier
- Television broadcasting equipment
- Information processing
- Voltage regulation circuit
- Scintillation detectors
- Digital cameras
- Medical instruments
