LM101AJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM101 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Power Supplies | +-5/+-20V |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 1W |
| Output Current | 25mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 10V~44V ±5V~22V |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000000 kHz |
| Voltage Gain | 104.08dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 700μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9.121518MV |
| Wideband | NO |
| Height | 5.08mm |
| Length | 10.16mm |
| Width | 6.502mm |
| Thickness | 4.064mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM101AJ Overview
It is packaged in an 8-CDIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. There is an input offset voltage of 2mV for this buffer op amp. This electronic part is recommended for mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -55°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.8mA . There should be no change in the voltage gain at 104.08dB. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 22V voltage.
LM101AJ Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM101AJ Applications
There are a lot of Texas Instruments LM101AJ Instrumentational OP Amps applications.
- Power transmission
- Multimedia playback equipment
- Thermocouples
- Signal operation
- Fast A/D and D/A converters
- RF cable systems
- Weighing systems
- Hand-held batteries
- Navigation
- Computer workstations
