banner_page

LM10CN

1 Channels 20mA per Channel 12nA 90 dB Instrumentational OP Amps 0.04μA 3V 1.1V~40V ±0.55V~20V LM10 8 Pins 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM10CN
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 749
  • Description: 1 Channels 20mA per Channel 12nA 90 dB Instrumentational OP Amps 0.04μA 3V 1.1V~40V ±0.55V~20V LM10 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Packing Method RAIL
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 1
Supply Voltage 20V
Base Part Number LM10
Pin Count 8
Operating Supply Voltage 3V
Number of Elements 2
Number of Channels 1
Operating Supply Current 300μA
Nominal Supply Current 500μA
Output Current 20mA
Max Supply Current 500μA
Slew Rate 0.2 V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 90 dB
Current - Input Bias 12nA
Voltage - Supply, Single/Dual (±) 1.1V~40V ±0.55V~20V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 4mV
Bandwidth 90 kHz
Gain Bandwidth Product 90 kHz
Neg Supply Voltage-Nom (Vsup) -20V
Voltage Gain 112.04dB
Average Bias Current-Max (IIB) 0.04μA
Power Supply Rejection Ratio (PSRR) 93dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Micropower YES
Bias Current-Max (IIB) @25C 0.03μA
Height 3.3mm
Length 9.27mm
Width 6.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LM10CN Overview


There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. The linear amplifier should be run at 20V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 4mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using an 300μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 112.04dB's 112.04dB family. The op amp ic has 1 channels on it. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the RAIL-axis is adopted.

LM10CN Features


8 Pins
supply voltage of 20V
112.04dB voltage gain

LM10CN Applications


There are a lot of Texas Instruments LM10CN Instrumentational OP Amps applications.

  • Video conversion and routing
  • Test and measurement instruments
  • Test equipment
  • Oscilloscopes
  • Portable media players
  • Ultrasound transducers
  • Weighing systems
  • pH (acidity)
  • Active probe
  • Image computer boards

Write a review

Note: HTML is not translated!
    Bad           Good