LM10CWM
| Parameters | |
|---|---|
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM10 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Slew Rate | 0.2 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 12nA |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 90 kHz |
| Neg Supply Voltage-Nom (Vsup) | -20V |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.03μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0007μA |
| Height | 2.65mm |
| Length | 8.992mm |
| Width | 7.498mm |
| Thickness | 2.301mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 14 |
LM10CWM Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.295, 7.50mm Width) case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. It is estimated that there will be 14 terminations in the next few months. The total number of pins on linear amplifier is 14. This linear amplifier should be powered by an 20V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 4mV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 300μA. There should be no change in the voltage gain at 112.04dB. On this buffer amplifier, there are 1 circuits. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 20V voltage.
LM10CWM Features
14 Pins
supply voltage of 20V
112.04dB voltage gain
LM10CWM Applications
There are a lot of Texas Instruments LM10CWM Instrumentational OP Amps applications.
- Blood pressure sensors
- Industrial control system
- Radiation thermometry transducers
- Signal amplification
- Digital cameras
- Biopotential
- Portable docking station
- Weighing systems
- Radar
- Automatic control
