LM10CWMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM10 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Slew Rate | 0.2 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 12nA |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 90 kHz |
| Neg Supply Voltage-Nom (Vsup) | -20V |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.03μA |
| Length | 9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM10CWMX Overview
In order to protect the op amps, a 14-SOIC (0.295, 7.50mm Width) case is used. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 14 terminations have been reported in the past few weeks. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 20V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are located on the operational amplifiers. The input offset voltage is 4mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 300μA . 112.04dB should remain the voltage gain. There are 1 circuits on op amps. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 20V. It is used TAPE AND REEL to pack the op amps.
LM10CWMX Features
14 Pins
supply voltage of 20V
112.04dB voltage gain
LM10CWMX Applications
There are a lot of Texas Instruments LM10CWMX Instrumentational OP Amps applications.
- Navigation
- Communication
- Communication device
- Logarithmic operation circuits
- single/dual op amp sum and difference circuits
- Automatic control
- Integrator circuits
- Wireless base stations
- Car stereo
- Precision measurement
