LM119H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C |
| Packaging | Box |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN/LEAD (SN63PB37) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM119 |
| Pin Count | 10 |
| Output Type | DTL, Open-Collector, RTL, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.3mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Max Supply Current | 4.3mA |
| Quiescent Current | 11.5mA |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 500nA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 500nA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Voltage - Input Offset (Max) | 4mV @ ±15V |
| Current - Input Bias (Max) | 0.5μA @ ±15V |
| Height | 5.72mm |
| Length | 8.96mm |
| Width | 8.96mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM119H Overview
To facilitate transportation, it comes packaged in TO-100-10 Metal Can .The comparator has an output type of DTL, Open-Collector, RTL, TTL .This device is designed in Box case.The comparator has 10 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.In terms of type, this is a typical General Purpose comparator.The total number of elements is 2 .Electronic comparator has 10 pins.Electronic comparator is recommended to mount using type Through Hole .Ideally, the operating temperature should be set at -55°C~125°C in order to prevent malfunction.The comparator has a pin count of 10 .Try search LM119 to get more pin-to-pin solutions for your special needs.A quiescent current of 11.5mA is observed in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .For normal use of the device, the nominal supply current should be 4.3mA .The compartator could be damaged if the current supply exceeds 4.3mA .A maximum current of 500nA can be supplied to the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 92.04dB .
LM119H Features
DTL, Open-Collector, RTL, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 11.5mA
Voltage Gain: 92.04dB
LM119H Applications
There are a lot of Texas Instruments LM119H linear comparators applications.
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones
- High-Speed Differential Line Receiver
- Window Comparators
- Window Comparators, Multivibrators
- General-Purpose Portable Devices
- Battery management and protection
- Alarm and Monitoring Circuits
- Automatic Test Equipment
