LM119J-SMD
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Comparator |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 500mW |
| Nominal Supply Current | 11mA |
| Max Supply Current | -4.2mA |
| Current - Output | 25mA |
| Response Time | 80 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 475nA |
| Input Offset Voltage (Vos) | 3.8mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.5μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 2.5V |
| Bias Current-Max (IIB) @25C | 0.475μA |
| Screening Level | 38535Q/M;38534H;883B |
| Total Dose | 100 krad(Si) V |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM119J-SMD Overview
A convenient transport package is provided in CDIP .There is a OPEN-COLLECTOR output type for this comparator.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 15V supplied, the comparator is capable of performing a wide range of demanding tasks.The device is equipped with 14 pins.The comparator is equipped with 14 pins.The PCB or other board has a Through Hole for mounting.Normally, the nominal supply current should be 11mA when using the device.A current supply greater than -4.2mA may cause the comparator to malfunction.Comparator electronics is not recommended to operate at a temperature higher than 125°C .Temperature lower than -55°C is not suitable for the it.A comparator's maximum supply voltage is 36V .A minimum supply voltage of 5V is allowed for this comparator.For the output to be of high quality, 2 channels must cooperate together.Comparator electronics is essentially a highly gain-adjustable COMPARATOR amplifier that forms the comparator.This device is usually used in ADC circuits (packaged in TUBE ).Its output current is rated as 25mA .
LM119J-SMD Features
OPEN-COLLECTOR output capability
COMPARATOR amplifier
LM119J-SMD Applications
There are a lot of Texas Instruments LM119J-SMD linear comparators applications.
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- RC Timers
- Window Comparators, Multivibrators
- Power management
- Hand-Held Electronics
- Laptop Computers
- Wide Range VCO; MOS Clock Timers
- High-Speed Sampling Circuits
- Ultra-Low Power Systems
