LM119W-SMD
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Comparator |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 500mW |
| Nominal Supply Current | 11mA |
| Max Supply Current | -4.2mA |
| Current - Output | 25mA |
| Response Time | 80 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 475nA |
| Input Offset Voltage (Vos) | 3.8mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.5μA |
| Bias Current-Max (IIB) @25C | 0.475μA |
| Screening Level | 38535Q/M;38534H;883B |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 2.032mm |
| Length | 6.858mm |
| Width | 6.121mm |
| Thickness | 1.778mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM119W-SMD Overview
The comparator has an output type of OPEN-COLLECTOR .There are 10 terminals on the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 15V voltage.The device includes 10 pins.The comparator has 10 pins.Normal operation of the device requires 11mA supply current.The compartator could be damaged if the current supply exceeds -4.2mA .There is no need to exceed 125°C in terms of temperature.A temperature lower than -55°C is unsuitable for the device.A comparator's maximum supply voltage is 36V .Using a voltage as low as 5V is possible for this comparator.For the output quality to be maintained, 2 channels work together.In essence, the comparator has a COMPARATOR amplifier with a high gain.This device can be used in general (for example, in ADC circuits). It is packaged in TUBE .Comparator electronics has an output current rated at 25mA .
LM119W-SMD Features
OPEN-COLLECTOR output capability
COMPARATOR amplifier
LM119W-SMD Applications
There are a lot of Texas Instruments LM119W-SMD linear comparators applications.
- Threshold Detectors
- Analog front end
- Set Top Boxes
- Battery-Powered Electronics
- Consumer Medical Electronics
- Industrial
- General-Purpose, Low-Voltage Applications
- Motor drives
- Wireless Base Stations
- Metering Systems
