LM124AJRLQMLV
| Parameters | |
|---|---|
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.26W |
| Current - Output | 40mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.050555μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 16V |
| Low-Bias | NO |
| Micropower | YES |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | NO |
| Screening Level | MIL-STD-883 |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Total Dose | 100k Rad(Si) V |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | Yes |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 16V |
| Power Supplies | +-1.5/+-15/3/30V |
| Temperature Grade | MILITARY |
| Number of Channels | 4 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
LM124AJRLQMLV Overview
In the package, you will find a CDIP-case to contain the op amp ic. An op amp ic of the OPERATIONAL AMPLIFIER type. A Rail/Tube case is used to deliver the buffer op amp. We are approaching the 14h termination of the year. In this case, there are 14 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 2mV. 93.98dB should remain the voltage gain. 4 channels are available on the instrumentation amplifier. The temperature should not be lower than -55°C for operational amplifier ics to operate. You should not use op amp above 125°C degrees. The operating supply voltage of the buffer op amp is rated at 16V. Under 32V is the minimum supply voltage for this electric component. As a general rule, it is advisable to keep the op amp's supply voltage above 3V at all times. The dual supply voltage of 16V should be used for the conduct of this electronic component.
LM124AJRLQMLV Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
LM124AJRLQMLV Applications
There are a lot of Texas Instruments LM124AJRLQMLV Instrumentational OP Amps applications.
- Precision measurement
- Instrumentation
- Industrial applications including automation
- Portable media players
- Tablets
- Fission chambers
- Active probe
- Integrator circuits
- Weighing systems
- Ultrasound transducers
