LM124AWGRLQMLV
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Number of Pins | 14 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 16V |
| Temperature Grade | MILITARY |
| Number of Channels | 4 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 700μA |
| Power Dissipation | 700mW |
| Current - Output | 40mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.050555μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 16V |
| Low-Bias | NO |
| Micropower | YES |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | NO |
| Screening Level | MIL-STD-883 |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Total Dose | 100k Rad(Si) V |
| Height | 2.34mm |
| Length | 9.906mm |
| Width | 6.35mm |
| Thickness | 1.778mm |
| Radiation Hardening | Yes |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM124AWGRLQMLV Overview
Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 2mV. Maintain 93.98dB as the voltage gain. Instrumentation amplifier has 4 channels on it. It should not lower than -55°C to operate buffer amplifier. At temperatures greater than 125°C, op amp should not be used. The operating supply voltage of the buffer op amp is rated at 16V. With regard to the supply voltage, this electrical component is capable of working from under 32V. In order to ensure that the instrumentation amplifier's supply voltage remains above 3V, it is recommended to keep it higher. The dual supply voltage of 16V should be used for the conduct of this electronic component.
LM124AWGRLQMLV Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
LM124AWGRLQMLV Applications
There are a lot of Texas Instruments LM124AWGRLQMLV Instrumentational OP Amps applications.
- Comparator
- Proportional operation circuits
- Signal transformation
- Strain gauges
- Division circuits
- earphone
- Power transmission
- Subtraction operation circuits
- Industrial applications including automation
- Switching amplifier
