LM124AWRQMLV
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Number of Pins | 14 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 16V |
| Temperature Grade | MILITARY |
| Number of Channels | 4 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 700μA |
| Current - Output | 40mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.050555μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 16V |
| Low-Bias | NO |
| Micropower | YES |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | NO |
| Screening Level | MIL-STD-883 |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Total Dose | 100k Rad(Si) V |
| Height | 2.032mm |
| Length | 9.906mm |
| Width | 6.35mm |
| Thickness | 1.778mm |
| Radiation Hardening | Yes |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM124AWRQMLV Overview
The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 2mV. Maintain 93.98dB as the voltage gain. On the buffer amps, there are 4 channels that can be used. This instrumentation amplifier cannot operate below -55°C degrees Celsius. Instrumentation amplifier shouldn't be used above 125°C . The operating supply voltage of instrumentation amplifier is rated 16V voltage. For packing the buffer amplifier, the TUBE-axis is adopted. With regard to the supply voltage, this electrical component is capable of working from under 32V. Keeping the linear amplifier's supply voltage above 3V is recommended. You should conduct this electronic component under the dual supply voltage of 16V.
LM124AWRQMLV Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
LM124AWRQMLV Applications
There are a lot of Texas Instruments LM124AWRQMLV Instrumentational OP Amps applications.
- Automation control systems
- Switching amplifier
- Large motor controllers
- High gain DC amplifier
- Voltage regulation circuit
- Image computer boards
- Division circuits
- Communication device
- Micro signal measurement
- Biopotential
