LM13700M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 26kOhm |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM13700 |
| Pin Count | 16 |
| Output Type | Push-Pull |
| Max Output Current | 650μA |
| Number of Channels | 2 |
| Nominal Supply Current | 2.6mA |
| Output Current | 20mA |
| Max Supply Current | 2.6mA |
| Min Input Voltage | -5V |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1μA |
| Max Input Voltage | 5V |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 650μA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Average Bias Current-Max (IIB) | 5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 300μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | YES |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.6μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM13700M/NOPB Overview
A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are Transconductance types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 16 terminations over the past year. In total, there are 16 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. 16 pins are located on the operational amplifiers. Op amp rates 4mV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Push-Pull signals, which is one of the many advantages it has to offer. 26kOhm should be the range of resistance for the linear amplifier.
LM13700M/NOPB Features
16 Pins
supply voltage of 15V
Output Type: Push-Pull
Resistance of 26kOhm
LM13700M/NOPB Applications
There are a lot of Texas Instruments LM13700M/NOPB Instrumentational OP Amps applications.
- Video computer boards
- Laptop
- High speed sample
- Voltage regulation circuit
- Portable electronic products powered by batteries
- Portable media players
- Hand-held batteries
- Polarized electrodes
- Division circuits
- Navigation
