LM13700MX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM13700 |
| Pin Count | 16 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.6mA |
| Output Current | 20mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 500μA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Average Bias Current-Max (IIB) | 5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | YES |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.6μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM13700MX/NOPB Overview
The linear amplifier is packaged in a 16-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called Transconductance-types. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 16-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. You can run this op amp ic on 2.6mA . The op amp ic has 2 channels on it. In addition to outputting Push-Pull signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 18V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
LM13700MX/NOPB Features
16 Pins
supply voltage of 15V
Output Type: Push-Pull
LM13700MX/NOPB Applications
There are a lot of Texas Instruments LM13700MX/NOPB Instrumentational OP Amps applications.
- Large motor controllers
- Differentiator circuits
- Strain gauges
- High gain DC amplifier
- Communication device
- Switching amplifier
- Multiplication circuits
- Cinema or auditorium audio system
- Computer workstations
- Radar
