LM139ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 127.998097mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM139 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM139ADR Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, MOS, Open-Collector, TTL output.This package has been designed with Tape & Reel (TR) .The comparator has a total of 14 terminals.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as Differential .The total number of elements is 4 .The device includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -55°C~125°C .This comparator has 14 pins.In order to find a solution that meets your specific needs, search LM139 for more pin-to-pin solutions.A quiescent current of 2mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 2mA supply current.If the current supply exceeds 500μA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 100nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .This device is usually used in ADC circuits (packaged in TR ).
LM139ADR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM139ADR Applications
There are a lot of Texas Instruments LM139ADR linear comparators applications.
- Set Top Boxes
- RC Timers
- Notebooks and PDAs
- Factory automation & control
- Mobile Phones and Tablets
- Ultra-Low Power Systems
- Mobile Phones
- Alarm and Monitoring Circuits
- General Purpose Low Voltage Applications
- Appliances
