LM139ADT
| Parameters | |
|---|---|
| Nominal Supply Current | 2mA |
| Power Dissipation | 830mW |
| Output Current | 16mA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 32V |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM139 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
LM139ADT Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a comparator of type CMOS, DTL, ECL, MOS, Open-Collector, TTL output on this device.We ship the part through Tape & Reel (TR) .The device is designed with 14 terminations.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 4 elements.The device is equipped with 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -55°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 14 pins.Search LM139 to find more pin-to-pin solutions.The comparator presents a quiescent current of 2mA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 2mA .There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input a maximum current of 100nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM139ADT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM139ADT Applications
There are a lot of STMicroelectronics LM139ADT linear comparators applications.
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- Set Top Boxes
- High-Speed Sampling Circuits
- Wearable Devices
- Motor drives
- Industrial
- Notebooks and PDAs
- Power Supervision
- Limit Comparators
