LM139AWG-QMLV
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Number of Pins | 14 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Output Type | OPEN-COLLECTOR |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 680mW |
| Nominal Supply Current | 500μA |
| Power Dissipation | 680mW |
| Max Supply Current | 2mA |
| Current - Output | 16mA |
| Response Time | 700 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 100nA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 2.5V |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Screening Level | MIL-PRF-38535 Class V |
| Height | 2.34mm |
| Length | 9.906mm |
| Width | 6.35mm |
| Thickness | 1.778mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM139AWG-QMLV Overview
A COMPARATOR-type buffer amplifier is shown here. There have been a total of 14 terminations over the past year. The pins on this board total to 14 in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Comparator. 14 pins are included on the operational amplifiers. Op amp ic rates 2mV for input offset voltage. There should be no change in the voltage gain. Instrumentation amplifier has 4 channels on it. Buffer amplifier produces OPEN-COLLECTOR signals, which is one of its many benefits. This op amp needs to be operated at a temperature of not less than -55°C degrees Celsius in order to function properly. You should only use op amp buffer at temperatures that are no higher than 125°C. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 30V. Keeping the linear amplifier's supply voltage above 5V is recommended. This electrical part should be conducted under the dual supply voltage of 15V volts when you conduct this part.
LM139AWG-QMLV Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
Output Type: OPEN-COLLECTOR
LM139AWG-QMLV Applications
There are a lot of Texas Instruments LM139AWG-QMLV Instrumentational OP Amps applications.
- Band-stop filter
- Radiation thermometry transducers
- Automotive sensors
- Signal amplification
- Comparator
- Active probe
- Addition operation circuits
- Micro signal measurement
- PDA
- Polarized electrodes
