LM139J/PB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.19W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM139 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 16mA |
| Max Supply Current | 800μA |
| Quiescent Current | 2.5mA |
| Response Time | 700 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM139J/PB Overview
The product is packaged in 14-CDIP (0.300, 7.62mm) in order to facilitate transportation.There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.We ship the part through Tube .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.Electronic comparator includes 14 pins.A Through Hole mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .14 pins are available on the comparator.You may wish to search LM139 for more solutions that address your specific needs.A quiescent current of 2.5mA is observed in this comparator.There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires 2mA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 800μA .There is sufficient power to run the device from 5V power supplies.Input current to the device cannot exceed 100nA .The voltage gain of the part is indicated by 106.02dB in the voltage formula.
LM139J/PB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM139J/PB Applications
There are a lot of Texas Instruments LM139J/PB linear comparators applications.
- Automotive
- Body Control Modules
- High-Speed Differential Line Receiver
- General Purpose Low Voltage Applications
- Handheld Instruments
- Mobile Phones
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- Ultra-Low Power Systems
- Security Detection Systems
