LM1558H
| Parameters | |
|---|---|
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM1558 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 500mW |
| Output Current | 45mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 6V~44V ±3V~22V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-205AA, TO-5-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Box |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
LM1558H Overview
There is a TO-205AA, TO-5-8 Metal Can case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Box case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 5mV. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges -55°C~125°C. You can run this op amp ic on 3mA . 104.08dB should remain the voltage gain. 2 channels are available on the instrumentation amplifier.
LM1558H Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM1558H Applications
There are a lot of Texas Instruments LM1558H Instrumentational OP Amps applications.
- Active probe
- Industrial control system
- High gain DC amplifier
- Hand-held batteries
- Vehicle electronics
- Professional videography
- Radar
- Car stereo
- Mobile phone
- Subtraction operation circuits
