banner_page

LM193AH

Through Hole Box 16mA mA 1300 ns μs Linear Comparators 106.02dB dB 100nA pA 1mA μA 2mV mV Through Hole


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM193AH
  • Package: TO-205AA, TO-5-8 Metal Can
  • Datasheet: -
  • Stock: 271
  • Description: Through Hole Box 16mA mA 1300 ns μs Linear Comparators 106.02dB dB 100nA pA 1mA μA 2mV mV Through Hole (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-205AA, TO-5-8 Metal Can
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Box
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Max Power Dissipation 660mW
Technology BIPOLAR
Terminal Position BOTTOM
Terminal Form WIRE
Number of Functions 2
Supply Voltage 5V
Base Part Number LM193
Pin Count 8
Output Type CMOS, DTL, ECL, MOS, Open-Collector, TTL
Operating Supply Voltage 3V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 1mA
Power Dissipation 660mW
Output Current 16mA
Max Supply Current 1mA
Propagation Delay 700 ns
Quiescent Current 2.5mA
Response Time 1300 ns
Voltage - Supply, Single/Dual (±) 2V~36V ±1V~18V
Input Offset Voltage (Vos) 2mV
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.1μA
Supply Voltage Limit-Max 36V
Max Input Current 100nA
Dual Supply Voltage 3V
Input Bias Current 100nA
Current - Quiescent (Max) 2.5mA
Voltage - Input Offset (Max) 2mV @ 30V
Current - Input Bias (Max) 0.1μA @ 5V
Current - Output (Typ) 16mA @ 5V
Height 5.72mm
Length 9.08mm
Width 9.08mm
Thickness 4.4mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LM193AH Overview


The product is packaged in TO-205AA, TO-5-8 Metal Can for ease of transportation.Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .The chip is packaged with Box .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.This is a 2 element comparator.A total of 8 pins are included.The recommended mounting method is Through Hole .As a precaution, it is recommended to set the operating temperature to -55°C~125°C to prevent malfunctions.Electronic comparator has 8 pins.You can search LM193 if you are looking for more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 1mA when using the device.Current supply exceeding 1mA could cause disfunction of the compartator.The device can be run with 5V power supplies.There is a maximum current that can be input into the device of 100nA .A voltage gain of 106.02dB can be determined from the voltage formula for the part.Comparator electronics is necessary to have a voltage of 3V for normal operation.

LM193AH Features


CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM193AH Applications


There are a lot of Texas Instruments LM193AH linear comparators applications.

  • Zero-Crossing Detectors
  • Infotainment and Clusters
  • Industrial
  • Wide Range VCO; MOS Clock Timers
  • Motor drives
  • Alarm and Monitoring Circuits
  • Pulse, Squarewave, and Time Delay Generators
  • Factory automation & control
  • Self-diagnostics
  • Building automation

Write a review

Note: HTML is not translated!
    Bad           Good