LM193DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 660mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM193 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM193DRG4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.This package has been designed with Tape & Reel (TR) .There are 8 terminals on the comparator.Electronic comparator is a part of Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as Differential .This is a 2 element comparator.A total of 8 pins are included.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -55°C~125°C to prevent malfunctions.The comparator is equipped with 8 pins.Try search LM193 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.If the current supply exceeds 500μA , the comparator might be damaged.5V power supplies are enough to run the device.Input current to the device cannot exceed 100nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .The normal operation of the system requires 28V operating voltage.Packed in TR , this device is for general uses (often in ADC circuits).
LM193DRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM193DRG4 Applications
There are a lot of Texas Instruments LM193DRG4 linear comparators applications.
- Notebooks and PDAs
- Factory automation & control
- Limit Comparators
- High-Speed Differential Line Receiver
- Battery management and protection
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- Infotainment and Clusters
