LM193DT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM193 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 710mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM193DT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL is being used.As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 2 elements.The board includes 8 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .The comparator is equipped with 8 pins.Alternatively, you may search for LM193 to find more pin-to-pin solutions for your specific needs.A quiescent current of 2.5mA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 1mA for normal use.An excess of current supply over 1mA could result in malfunction of the comparator.The maximal current your can input into the device is 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .
LM193DT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM193DT Applications
There are a lot of STMicroelectronics LM193DT linear comparators applications.
- Threshold Detectors
- Window Comparators
- System control and monitoring
- Automatic Test Equipment
- Motor drives
- Infotainment & cluster
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- Mobile Phones and Tablets
- Self-diagnostics
