Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-99-8 Metal Can |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Box |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
660mW |
Technology |
BIPOLAR |
Terminal Position |
BOTTOM |
Terminal Form |
WIRE |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM193 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Power Dissipation |
660mW |
Output Current |
16mA |
Max Supply Current |
1mA |
Propagation Delay |
700 ns |
Quiescent Current |
1mA |
Response Time |
1300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.1μA |
Supply Voltage Limit-Max |
36V |
Input Bias Current |
100nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.1μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height |
5.72mm |
Length |
9.08mm |
Width |
9.08mm |
Thickness |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM193H/NOPB Overview
To facilitate transportation, it comes packaged in TO-99-8 Metal Can .A comparator with an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL is being used.The part is shipped by Box .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to -55°C~125°C to avoid mal-function.The comparator is equipped with 8 pins.You can search LM193 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 1mA .This component has a Through Hole mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 1mA .Current supply exceeding 1mA could cause disfunction of the compartator.This device requires 5V power supplies to operate.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .
LM193H/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 1mA
Voltage Gain: 106.02dB
LM193H/NOPB Applications
There are a lot of Texas Instruments LM193H/NOPB linear comparators applications.
- Lithium ion battery monitoring
- Power management
- Zero-Crossing Detectors
- Wireless Base Stations
- Window Comparators
- Laptop Computers
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- General-Purpose, Low-Voltage Applications
- Point of load regulators